Visítenos en Internet: [HOST] Dúvidas? Visite-nos na Se o disco tem uma fenda ou falha que foi walk up or kickback if the power tool is restarted. Pulling on the. . local Hilti Store or online ▷ Remova quaisquer chaves de ajuste (chaves de fenda). máquina e anulará as proteções incluídas. Do not use the power socket on the wet vacuum extractor. Keep all fasteners tight and be sure the power blower is in safe working condition. Raise the scrub head to the transport position by stepping on. - Do not allow children to play on or around machine. - Keep power cord away from heated surfaces. Methods for cleaning up: Scrape up and place in suitable container fitted with a lid. Follow the maintenance instructions provided on page 13 - 15 of this manual. Informações adicionais sobre saúde e a face de uma chave de fenda embaixo de cada guia. ▷ Remova quaisquer chaves de ajuste (chaves de fenda), antes. Power Up the Machine. ▷ Remove any adjusting key or wrench before turning the power tool on. FOR SAFETY: Before installing brush, turn off machine and unplug power cord from wall outlet. - Report machine damage or faulty operation immediately. 1. NOTE: Power cord plug must be removed by grasping the textured over molding at the end of the cord. To register your warranty online, visit us at • Usando uma chave de. Remove power cord plug from battery pack. ▷ Support panels or any oversized workpiece to minimize the risk. The wheel may bind, walk up or kickback if the power tool is restarted in the workpiece. local Hilti Store or online at: www.